TWS Wireless Earphones BT Earphones

Product Features TW70: Touch the headset, remove the headset from the charging compartment and turn it on automatically, place it in the charging compartment for automatic charging; Support siri calls; answer / hang up the phone; Switch songs; Volume up and down. Model: TW70 bluetooth headset...

Product Details


Product Features TW70: Touch the headset, remove the headset from the charging compartment and turn it on automatically, place it in the charging compartment for automatic charging; Support siri calls; answer / hang up the phone; Switch songs; Volume up and down.

Model: TW70 bluetooth headset

Color: pink, green, white, black

Bluetooth solution: Jerry

Horn: high-quality ring speaker made of real copper

Headphone chip: AC6936D

Working time: 3-4 hours

Standby time: 10 days

Charging time: 40-50 minutes

Headphone Battery Capacity: Pure Cobalt 40mAh

Battery capacity: 400mAh pure cobalt

Effective distance: 10 + m

Total weight: 100g

Package size: 7.2 * 4.4 * 10.3 cm (length * width * height)

Standard: Earphones * 2 + charging box + 3 pairs of ear caps + USB charging cable + manual + packing box

Cardboard box

Material: ABS + PC

1. Get started

Pull out the headset to turn it on, or manually press and hold for 5 seconds to turn it on. Red and blue lights blink on and off.(Note: if the charging compartment is in standby mode for a long time, this will cause the charging compartment to discharge, but the headset can still be used normally. Just turn on the power manually. If this happens, press and hold the button for 5 seconds , to turn on

2. Turn off

After installation in the charging compartment, the cover may be automatically turned off, or you can manually press and hold the headset button for 5 seconds to turn it off. (When the device is not connected, it will automatically turn off after 3 minutes)

3. Bluetooth pairing

After turning on, it automatically goes into pairing mode. After pairing is successful, the blue lamp on the left ear flashes and the mobile phone can be connected to Bluetooth for use. After the mobile phone is successfully connected, the lamp is turned off.Find the appropriate name for the Bluetooth pairing “TW60” in the phone’s Bluetooth list and click “connect to pairing”. About 3 seconds of voice prompts indicate that the connection is successful. If the same phone is used again, you only need to turn on the headset and the phone will automatically end the connection and pairing. If you use it for another phone, you need to find the pairing name “TW60” and click “connect”.

4. Charging instructions

When the charging compartment is charging, the red lamp on the charging compartment flashes, and the red lamp on the charging compartment always lights up after the battery is fully charged. ZhWhen charging the headset with the charging compartment, the red lamp of the headset remains on, and the blue lamp of the charging compartment remains on. When the headset and charging compartment are fully charged, the headset turns blue and then the lamp goes out.

5. Call mode

When the headset is turned on and connected to the phone, press and hold any button on the left and right headsets for 2 seconds to wake Siri, and both headsets work simultaneously.With an incoming call, you will be offered an electronic tone + broadcast number. Press any button on the left and right headphones to answer the call. During a call, press any button on the left and right to hang the headphones. Press and hold 2 S to reject the call.

6. Key definitions:

Press: play / pause, answer / freeze

Reject Call: Long press for 2 seconds

Double click: left ear double click on the previous song, right ear double click on the next song

Three-strike: Left-three-strike the volume decreases, three-strike the volume of the right ear increases

Long press for 2 seconds: Awaken Siri



Hot Tags: tws wireless earphones bt earphones, China, factory, suppliers, manufacturers, wholesale, customized, buy, made in China

Inquiry

You Might Also Like